RAINCARE WALL PUTTY

Where to use RAINCARE WALL PUTTY: waterproof wall putty as a paint base

RAINCARE WALL PUTTY is a waterproof wall putty based on white cement, used as a base coat before paint. It is mixed with water to a smooth, spreadable consistency and applied with a putty blade or trowel. As a white cement wall putty it gives high whiteness and a smooth finish on interior and exterior walls.

• Interior Wall Surfaces

  Gives a smooth, high-whiteness base for interior paint.

• Exterior Wall Surfaces

  Waterproof putty base for outside walls before painting.

• Concrete & Plaster Walls

  Wet the wall slightly before applying the first coat.

• Pre-paint Base Coat

  Two coats are typically recommended, sanded lightly before paint.

• Surface Filling & Levelling

  Fills surface imperfections at 1–2 mm thickness per coat.

• Ceiling Surfaces

  Applied by putty blade or trowel in thin coats.

As a wall putty for damp walls, note that this putty is waterproof, but the wall must be clean and dry when you apply it. Use two coats of 1–2 mm each, with 12–24 hours of drying after the first. As a putty before paint, sand it lightly once dry.

Armstrong Chemicals supplies RAINCARE WALL PUTTY to sites across Telangana, Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, including Hyderabad, Vijayawada, Bengaluru, Kochi and Chennai.

Why RAINCARE WALL PUTTY works

• White cement base

  The white cement base gives high whiteness, a clean starting colour under your paint.

• Waterproof properties

  The putty is waterproof, so the paint sits on a water-resistant base coat.

• Fills and smooths

  Applied at 1–2 mm per coat, it fills surface imperfections and leaves a smooth, uniform wall for painting.