Our
Products.

CONPROOF LW 200 is an integral waterproofing admixture for concrete and cement mortars, containing a blend of hydrophobic particles, lignosulphonates and proprietary chemicals that contract capillaries and make concrete denser and more watertight. Compliant with IS 2645-2003 and corrosion-resistant to JIS: Z 1535 (modified). Improves workability, cohesiveness and water reduction — uniform waterproofing throughout the mix from a single liquid dose. Free from sulphates; chloride content less than 0.1%.

CONSPLAX 411 R is a chloride and sulphate-free concrete plasticizer and water reducing agent, compliant with IS 9103-1999. Formulated after extensive research, it lubricates harsh mixes, increases cohesiveness and plasticity, and reduces the water-cement ratio without loss of workability — producing completely watertight, more durable concrete. Delivers a 40% increase in durability against sulphate salts, seawater and aggressive waters. Used extensively in mass concrete works — dams, barrages, canal lining, port projects — and all concrete structures requiring improved workability.

ROOFPLAST SP 45 is a high range early strength super plasticiser and water reducing admixture based on modified sulphonated naphthalene polymers, compliant with IS 9103-99 (Amended 2003), BS-5075 Part 3 and ASTM-C-494 Type G. It reduces water-cement ratio by 20–30% without loss of slump, producing high density, cohesive concrete with reduced permeability and improved surface finish. Provides 4–5 hours of retardation to avoid cold joints in large concrete pours. Ideal for M-30 and above, high early strength, precast, ready-mix and pumped concrete. Non-toxic, non-flammable, chloride-free.

ROOFPLAST SP 35 is a high-performance super plasticiser and water reducing admixture based on specially formulated organic polymers, compliant with IS 9103-99. It disperses cement particles effectively in all concrete mixes, increasing ultimate strength and producing high workability and pumpability without slump loss. Delivers 40–50% early strength gain when water reduction is used, and up to 20% improvement in strength at constant slump. Chloride-free, non-flammable and safe for prestressed concrete. Approved and used across CPWD, State PWDs and major government infrastructure projects.

ROOFPLAST SP 25 is a super plasticiser and water reducing admixture based on specially formulated organic polymers, compliant with IS 9103-99. At just 100–150g per 50kg bag of cement, it disperses cement particles uniformly and effectively — improving slump from 50mm to 148mm in workability trials, reducing bleeding and segregation, and improving pumpability and surface finish. Chloride-free, non-toxic, non-flammable and safe for prestressed concrete. Approved and used across CPWD, State PWDs and major government infrastructure projects.

ROOFPLAST PC 455 is a next-generation chloride-free, polycarboxylic ether (PCE)-based high range water reducer and slump retention plasticiser, compliant with IS 9103-99 and AS 1478 Type WR. Ideal for high-strength, self-compacting, high-level pumping and precast/prestressed concrete — delivering superior water reduction, slump retention, high early compressive strength and resistance to shrinkage and cracking. Compatible with micro silica, GGBS and fly ash. Used in dams, bridges, runways, highways and high-rise buildings.

CONPROOF 500 is a high-plasticizing, micronised integral liquid waterproofing compound for plastering and concrete — the most efficient and dependable waterproofing compound in the Armstrong range. Compliant with IS 2645-2003, with nil chloride content, compatible with all types of ordinary Portland cement, super sulphate and slab cement. A multi-action compound: it reduces permeability, controls water-cement ratio, prevents bleeding and segregation, and forms millions of micronised hydrophobic particles that block and coat capillary channels and voids from within.

CONPROOF No. 1 is a Bureau of Indian Standards certified, ISI marked, high-power concentrated integral liquid waterproofing compound compliant with IS 2645. Added at just 100ml per 50kg bag of cement, it improves waterproofing, workability and cohesiveness of plaster and concrete mixes — reducing permeability, eliminating cracks and efflorescence, and improving bond strength between concrete and steel. Water-based, non-hazardous. For basements, roof slabs, screeds, water retaining structures, swimming pools, tanks, reservoirs, sumps, dams and canals.

CONPROOF RMC ADMIX 88 is a high-performance, water-reducing, crack-resistant waterproofing free-flow admixture specifically designed for ready-mix concrete operations. Added to the transit mixer at site — 100ml per 50kg bag of cement, or 4.2–5 litres per standard 6m³ load — it reduces hydration cracking, improves workability and cohesiveness, eliminates efflorescence, and strengthens the bond between concrete and steel. For water retaining structures, basements, roof slabs, screeds, bathrooms and external plaster in ready-mix concrete applications.

ROOFPLAST SA 80 is a chloride-free, alkali-free liquid set accelerator for sprayed and emergency concrete. Complies with IS 9103-99 (< 0.1% chloride BS 5075, < 1% alkali). Delivers exceptionally high early strengths with initial set under 2 minutes and final set under 6 minutes at spray dosage. Freeze point -16°C, pH 2.5 — safe for prestressed and reinforced concrete when properly dosed. For tunnel and mine linings, rock support shotcrete, pre-cast concrete, cold-weather concreting, underwater foundations and emergency repairs.

Set accelerator Admixture for sprayed concrete, shortcrete and gunite process. Complies with IS 9103-99. Converts flowable sprayed concrete into cohesive, non-sagging consistency. Provides extremely fast setting with continuous early-age strength development.

Quick setting, rapid hardening and waterproofing compound. Complies with IS 9103-1999 and ASTM C-494 Type C. Ideal for wet mix applications where sprayed concrete converts into cohesive, non-sagging consistency. Extremely fast setting with continuous early-age strength development for thick layers.

Fast Setting - Rapid Hardening Water Resistant Admixture. Complies with IS 9103-99. Extremely fast setting coupled with continuous early-age strength development. Liquid product for easy handling. For tunnels, mining, poor ground conditions, soil stabilisation, and TBM tunnel linings.

ROOFEXCURE WB is a 100% acrylic blended, white pigmented, water-based concrete curing compound compliant with ASTM-C-309 Types 1-1D, Class B and IS 15865:2018. Applied by spray to freshly placed concrete, it forms an impervious penetrative membrane that prevents excessive water evaporation — allowing more efficient cement hydration and significantly reducing shrinkage, crazing, spalling and flaking. A single application replaces water ponding, Hessian covers and sand blanket curing entirely. The white pigmentation confirms even coverage visually on site. Compatible with paints, adhesives and resilient floor coverings. Non-toxic, non-flammable. Approved for dams, bridges, roads, reservoirs, canal linings, buildings and precast concrete.

High performance Wax Based Concrete Curing Compound. Provides maximum moisture retention on fresh concrete surfaces by forming an efficient wax film barrier. Minimises plastic shrinkage cracks, dusting, and improves surface durability for roads, slabs, and pavement applications.

High Performance Elastomeric Acrylic Polymer modified cementitious Waterproof System. Tough flexible hard wearing surface, resistant to UV rays. Jointless and seamless membrane.

ROOFBOND RFX PLUS 210 is a high-performance flexible reinforced waterproof coating engineered for structures under sustained water pressure. It delivers 5–5.5 N/mm² tensile strength with 120%+ elongation, bridges cracks up to 3.5mm and shows zero water penetration at a 50-metre water column, with a bond strength of 2.0 N/mm² to prepared concrete and a stated durability of 10+ years.

Single-component, 100% pure acrylic elastomeric waterproof exterior coating for external walls, terraces, sloped roofs, MS/ACC sheets. White and heat-reflective, self-curing, with excellent elongation and recovery to bridge existing and future cracks. Remains unaffected by salt water, soap water, mild acids and alkalies, and acts as an effective heat transfer barrier.

High Performance Acrylic Elastomeric Transparent waterproof Coating for visible surfaces.

Single-component, cold-applied rubberized elastomeric flexible waterproof exterior coating — self-curing, with exceptional elongation and crack-bridging across a wide temperature range. Resistant to fungus, algae, salts, mild acids and alkalies.

High-performance, elastomeric acrylic-bituminous blended waterproof coating for a wide range of surfaces — concrete, steel, and chemically treated floors. A water-based, high-solids, cold-applied, single-component liquid membrane, ready to use straight from the pack. Recommended for terraces, sloped roofs, MS/ACC sheets, external retaining walls, bathrooms and toilets.

RAINSEAL FRC 623 is a single-component, 100% pure, multi-dimensional fibre reinforced acrylic elastomeric waterproof coating with the highest elongation in its family — 450% at break. Self-curing, tough and abrasion-resistant, with 7-bar water permeability resistance (BS EN 12390 & ASTM C 297), 80% heat reflectivity (ASTM E 903) and 2000-hour UV resistance (ASTM G 154). Compliant with ASTM C-836/89 A. Formerly RAINPROOF FRC 623.

RAINSEAL CFR 613 is a single-component cellulose fibre reinforced aliphatic acrylic elastomeric solar reflective waterproof coating — the highest-SRI (106) coating in the Armstrong CFR/FRC family. Aliphatic film formation delivers inherent UV stability with no yellowing, reducing roof surface and interior room temperature by 8–10°C. 2000-hour UV resistance (ASTM G 154), 7-bar water permeability resistance and the longest 2-year shelf life in the range. Compliant with ASTM C-836/89 A and ISO 9001:2015. Formerly RAINPROOF CFR 613.

RAINPROOF PU 400 is a single-component, liquid-applied polyurethane waterproofing membrane — highly elastic, cold-applied, and self-curing. Built on pure elastomeric, hydrophobic polyurethane resins with excellent mechanical, chemical, thermal and weathering resistance. Recommended for wet areas and under-tile applications in kitchens, bathrooms, balconies, terraces and walls, as well as power houses, water-retaining structures and reservoirs. (Formerly known as ROOFCOAT PU 400.)

RAINCARE PU CLEAR is a single-component, ready-to-use, transparent polyurethane blended waterproof coating. Being clear, it leaves the original appearance, colour and texture of the substrate completely unchanged — making it ideal wherever a visible protective coat would compromise aesthetics. Single-component, self-curing, cold-curing. Resistant to water, dilute acids, oils, fungi and micro-organisms. Service temperature: -20°C to +80°C. For metal, concrete, wood, asbestos, stone and plaster — for exterior vertical walls, roofs, terraces, metal and asbestos structures, and concrete or metallic floors requiring abrasion resistance.

RAINPROOF PRG 909 is a single-component, cold-applied polyurethane rubberized elastomeric grey waterproof exterior coating — self-curing, with exceptional elongation and crack-bridging across a wide temperature range. Designed by blending special polyurethane resins, rubber, and water-repellent silicon fillers with gelling agents, it forms an impervious, tough, abrasion-resistant membrane resistant to fungus, algae, salts, mild acids and alkalies. Suitable for terraces, sloped roofs, MS/ACC sheets and retaining walls. Can be applied over existing bitumen-coated surfaces.

ROOFCOAT PU 2K is a two-component, cold-applied, self-curing polyurethane-cement hybrid elastomeric waterproof membrane. Compliant with EN 1062-3 and EN 1504-2, it combines chemical bonding (polyurethane) with hydraulic bonding (Portland cement) to deliver 5-bar water resistance, NIL chloride permeability (ASTM C 1202), and 150% elongation. Recommended for under-tile wet areas, water-retaining structures and infrastructure concrete protection.

RAINPROOF PWR 690 is a two-component, 100% solids, fast-setting hybrid polyurea-polyurethane aliphatic waterproofing coating for extreme climatic conditions. Aliphatic chemistry delivers inherent UV stability without yellowing; 100% solids means every millimetre applied stays in the cured membrane — forming a seamless, elastic thick-film waterproof layer with >700% elongation, >30 MPa tensile strength and documented durability of up to 30 years at 1.2–2.0mm DFT. Complies with ASTM C-1250, D-2196, D-1475 and D-570. CPWD and government infrastructure approved.

RAINPROOF PHW 600 is a two-component, 100% solids, Zero-VOC, rapid-setting hybrid polyurea aliphatic waterproof coating — the only Zero-VOC hybrid polyurea in the Armstrong range. Spray-applied by heated plural-component equipment, it develops full membrane thickness in a single pass with >510% elongation and walkable performance in 10 minutes. Compliant with ASTM D 412, D 4060 and G 154. Requires ROOFBOND PRIMER 601/602.

Single component cold applied heat resistance fibre reinforced polyurethane waterproofing Ultra coating. Advanced single component system combining heat resistance with fibre reinforcement for demanding waterproofing applications including industrial terraces and metal surfaces.

RAINPROOF PHB 660 is a two-component, 100% solids, solvent-free, rapid-setting hybrid polyurea/polyurethane aliphatic waterproofing coating with a 5–10 second gel time and 2-minute walkability — the fastest return-to-service in the Armstrong hybrid polyurea range. Light Grey finish. CPWD approved. 14.7 MPa tensile strength with excellent thermal, UV, chemical and weather resistance. Compliant with ASTM C-1250, D-2196, D-1475 and ASTM D 570.

RAPIDSTRONG GROUT PU is an expansive, water-reactive, water-barrier polyurethane injection grout for free-flow pressure grouting. When it contacts water — including seawater and water containing slight acids or alkalies — it reacts quickly, expands into surrounding pores, cracks and narrow gaps, and polymerises within 36–48 seconds into a tough, highly adhesive solid. Non-toxic, non-pollutant, with no effect on potable water or marine life. Suitable for soil and abutment stabilisation, underground basements, retaining walls, rock areas, earth filling segments and structures exposed to waste water, industrial, chemical and sewage environments.

RAPIDSTRONG GROUT VM 99 is a high-performance, solvent-free, two-component polyurethane-based duromer injection resin for the structural sealing and strengthening of cracks, joints and cavities in both dry and water-bearing concrete structures. Mixed A+B at 1:1, it gels in 25–30 seconds and achieves >75 MPa compressive strength and 70 MPa flexural tensile strength — tested to DIN EN 196 T1. Capable of curing down to -20°C, with 1–12× volume expansion on water contact depending on ingress, and re-injectable through existing hoses for permanent capillary sealing. Suitable for pressure injection and gravity feed. Industrial use only.

Two components high strength Crystalline Blended Elastomeric water Barrier Grout. Complies with BS 1881.

ROOFEX is a high-performance penetrative crystalline waterproofing system. When applied to concrete, its active ingredients penetrate deep into the substrate and react with cement compounds and moisture — forming multiplied crystals that seal capillaries, pores and hairline cracks from within, transforming porous concrete into an impermeable mass. Effective against both positive and negative hydrostatic pressure. Four application methods: slurry coat, dry shake on fresh concrete, dry pack for joints and fillet sealing at construction joints. For water retaining structures, basements, effluent treatment and sewage plants.

RAPIDSTRONG GROUT PFC 79 is a single-component, water-reactive polyurethane polymer injection resin grout. When it contacts water, it initiates a rapid polymerisation reaction — expanding into surrounding pores, cracks and narrow gaps within 36–48 seconds to form a tough, highly flexible solid that stops active water ingress. Non-toxic and non-flammable, it is designed for free-flow pressure injection to seal active leaks, strengthen ground, and protect MS columns and structures against corrosion in basements, retaining walls, underground structures and rock areas.

High Performance Two Component water reactive Injection Resin for sealing and strengthening of dry and water bearing concrete structures. Multi-part composition provides deep penetration, tenacious crack bonding, and corrosion resistance in both dry and wet surface conditions.

Liquid applied High Performance Crystalline waterproofing system. Advanced liquid crystalline technology that penetrates deep into concrete and diffuses over time, reacting with cement material to fill airline cracks inside concrete with multiplied crystals. Makes porous concrete into a sound watertight substrate.

ROOFEX 2K 711 is a high-performance two-component crystalline waterproof coating mixed at 1:2:0.2 (Liquid:Powder:Water). Its active ingredients penetrate concrete and react with cement and moisture to form multiplied crystals that seal capillaries, pores and cracks from within. Tested to multiple ASTM standards: 10–12 bar hydrostatic resistance, 51 MPa compressive strength, 1.65 MPa adhesion and 16% elongation. Flexible, self-healing, self-curing. Suitable for positive and negative waterproofing on concrete, brick and stone masonry. For reservoirs, swimming pools, water tanks, basements, tunnels and sewage treatment plants.

ROOFEX COP is a cement-based waterproof coating with crystallization and osmotic properties, conforming to ASTM C 1202 and DINV 18998. Applied by brush or spray, it penetrates into concrete and activates both crystalline crystal formation and osmotic action — sealing cracks up to 0.4mm, blocking capillaries and pores, and remaining 100% waterproof even in permanent immersion at high pressures. Resists salt water and atmospheric pollution. For negative and positive waterproofing of water retaining structures, basements, effluent treatment and sewage plants.

RAPIDSTRONG GROUT EP 403 is a two-component, low-viscosity, free-flow epoxy resin grout compliant with ASTM-C-881-78, designed for filling gaps between industrial machinery base plates and concrete or steel substrates under mobile, reciprocating and dynamic loads. Non-shrink with high compressive, tensile and flexural strength — achieving up to 91 N/mm² at 7 days. Three formulations for fine gaps (0.1–10mm), medium gaps (10–70mm) and large gaps (>70mm), with filler materials supplied by Armstrong. Resistant to oil, grease, fats, mild acids, alkalies, fresh water and seawater. Used in steel works, refineries, electroplating plants, chemical plants, turbine installations and crane rail foundations.

Two Component Structural Grade High build Under Water Epoxy mortar/concrete for heavy load situations.

ROOFCRETE EP is a three-part, solvent-free structural epoxy concrete and mortar system — epoxy resin, amine hardener and silica filler, mixed with site-graded aggregates to form a high-strength epoxy repair concrete. Designed for reinstatement of distressed and defective concrete in deep section repairs: foundations, dams, spillways, bridges, runways and highways. Achieves 93 N/mm² compressive strength at 7 days, bonds to cement at 4 N/mm², and cures unaffected by humidity — suitable for both damp and dry surfaces.

High Strength Non-Shrink Cementitious Micro Concrete. Can be poured or pumped in restricted areas.

Free Flow, High strength, Non-shrink cementitious precision Grout Powder. Complies with BS 1881 Part 116:1983 and ASTM C1107. Produces gaseous expansion to compensate against shrinkage, achieves high early strength, excellent flowability for complete load bearing area contact.

High Strength, Polymer Modified Fibre Reinforced Non-shrink cementitious Micro Concrete. Advanced pre-packed dry micro concrete with polymer and fibre reinforcement for structural strengthening measures. High ultimate strength with low permeability — can be poured or pumped in restricted areas.

High Strength, Polymer Modified Non-shrink cementitious Micro Concrete. Pre-packed dry micro concrete with polymer modification for structural repairs and rehabilitation. High ultimate strength, low permeability, no vibration required, compensates for shrinkage with controlled expansion.

RAPIDSTRONG GROUT ADMIX is a non-shrink, free-flow, high-strength grout admixture supplied as a dry powder for site-batch cement grouts. Complies with BS 8110 Part 1:1985 Section 8.9.4.6, chloride-free to BS 5075. A single 250g addition per 50 kg of cement acts as both a plasticiser and a gas-producing expansion medium — providing 1–4% controlled positive expansion (ASTM C827) that counteracts shrinkage and settlement. Suitable for duct grouting, crack and honeycomb filling, void filling and pressure grouting of prestressed and reinforced concrete.

Non-Shrink, Expansive Free Flow, High strength Polymer Based Grout Additive. Complies with BS 1881 Part 116:1983. Provides controlled expansion to compensate for shrinkage, high early strength, excellent flowability for complete load bearing area contact, and high bond strength for extended repair performance.

Free flow Non-shrink injection grout. Excellent Crystallization Process System for sealing capillaries and voids.

Epoxy Pourable Resin Based Bonding Agent. Follow Armstrong's advised mix and pour procedure. Complies with AS 4020:2018 and AWQC Report 32319. Excellent chemical resistance, corrosion resistant, usable in wet or underwater conditions. Non-expansive, good consistency, rapid strength gain.

RAPIDSTRONG AG is a two-component, high-strength polyester resin anchor grout for anchoring foundation bolts, reinforcement bars, machinery base plates and structural fixings into concrete or rock. When the two components are mixed, an exothermic reaction occurs — the resin cures and hardens to produce anchorage of exceptional durability and strength. Non-expansive, free-flowing, and usable in wet or underwater conditions. Achieves 70 N/mm² compressive strength in 1 day and 81 N/mm² at 7 days. Complies with ASTM-827 SNF CROC 621, BS 5080 and BS 4551.

Two parts high strength polyester Resin Anchor Grout. Complies with ASTM-827 SNF CROC 621. Excellent chemical resistance, corrosion resistant, rapid strength gain, non-expansive, free flowing. Ideal for fixing foundation bolts, machinery base plates, reinforcement extension bars, and rock bolting.

ROOFBOND SBR is a high-performance Styrene Butadiene Rubber (SBR) latex polymer bonding agent for high-quality cementitious repairs and structural restoration. A multifunctional, single-component liquid for both internal and external surfaces, it also provides high-performance waterproofing — a universal repair product for concrete and masonry works.

ROOFBOND EP is a two-component, solvent-free epoxy resin bonding agent for producing excellent bond strength between old and new concrete and cementitious surfaces. Brush-applied in a thin film, it cures to a high-strength epoxy bond layer with an open overlay window of 2–3 hours at 30°C and 5–6 hours at 20°C. It delivers 52 N/mm² compressive, 36 N/mm² flexural and 25 N/mm² tensile strength. Suitable for both damp and dry surfaces. Approved and extensively used across CPWD, PWDs, APGENCO and government infrastructure projects.

Stops water flow, sets in 30 seconds. For underwater plugging to stop leakage and seepage.

Acrylic Emulsion Modified concrete Bonding Agent and Admixture. High quality modifier and multi-functional product providing highly durable and impermeable cementitious concrete and mortar. Excellent weather resistance for structural repairs and restoration. Can be used as bond coat (1:1 with cement) or admixture.

Acrylic Polymer Bonding Agent. High performance polymer bonding agent reducing permeability in cementitious mortars and concretes. Compatible with all cement types. Eco-friendly and non-toxic. Used as bond coat or admixture to increase durability and tensile and flexural properties.

High Performance Hydraulic setting instant plugging and expandable material with water resistance. Advanced hydraulic cement based plugging compound for instantly arresting active water leaks. Expands on setting to provide excellent watertight seal in wet conditions.

WONDERSEAL XL is a high-performance, highly flexible, water-resistant acrylic latex caulking and fast-setting sealant for architectural and interior finishing applications. White, non-flammable, overpaintable and paperable — seals joints around windows, door frames, cornices, skirtings and staircases with excellent adhesion to concrete, brickwork, plaster, wood and glazed tiles. No priming required. Cures by loss of water, with a skinning time of 15–45 minutes and full cure in 3–5 days.

ROOFEXSEAL PU is a low-modulus, single-component, high-performance polyurethane sealant. Once cured, it forms a tough, flexible seal capable of cyclic expansion and compression movement of 50% (±25%) of the original joint width. Virtually unaffected by rain, sunlight, snow, sleet, UV radiation, ozone, and atmospheric pollution, it retains its original properties for years of exposure.

ROOFEX-SEAL PS is a two-component polysulphide liquid polymer sealant, available in Gun Grade (non-sag) and Pour Grade (self-levelling). When mixed, the base and curing agent react to form a firm, flexible rubber-like seal with excellent adhesion to concrete, masonry, wood, glass, acrylic and PVC. Capable of withstanding repeated expansion, contraction and cyclic movement without loss of adhesion — with 30% movement accommodation on butt joints, 50% on lap joints, and a stated service life of 20 years or more. Service temperature: -40°C to +80°C. Compliant with ASTM C-920-87, DIN-18549, TT-S-00227E and BS-4254-83. CPWD and government infrastructure approved.

Polymer modified Fine Crack Filling compound in powder form. High performance cementitious crack sealer for fine cracks in concrete and masonry. Mix with water to fill hairline and fine cracks. Provides durable, flexible seal with good adhesion.

Polymer modified Silica Based Crack Filling compound in powder form. High performance silica-based formulation for filling and sealing cracks in concrete and masonry surfaces. Mix with water to achieve a durable waterproof crack fill.

Specialised primers for Polysulphide sealant applications. PS variant for Porous Surfaces, NPS variant for Non-Porous Surfaces. Must be applied before sealing with ROOFEXSEAL PS polysulphide sealant. Complies with C-920-87, DIN-18549, TT-S-00227E, BS-4254-83.

Ready to use Acrylic Blended Bituminous Cracks and Joints grout. Cut cracks to V shape, remove loose particles, clean and seal with paste. Provides excellent bonding and flexible properties. Excellent resistance to water and abrasion. Recommended for sealing cracks and joints of AC/GI Sheets, masonry, concrete, and bituminous roads.

Elastomeric bitumen sealing compound for sealing of joints, runways, roads, parking places, and platforms. High performance bituminous compound providing flexible, durable sealing for movement joints in pavements, runways, and industrial floors.

Highly flexible Expansion Joint sealing tape. Pre-formed flexible waterproofing tape for sealing expansion joints, construction joints, and movement joints in concrete structures. Excellent elongation properties accommodate structural movement without failure.

TILEX 350 Tile Adhesive is a thin-set polymer modified cementitious tile and stone adhesive compliant with IS 15477-2004 minimum Type 1. Single component — just add water. Non-shrink, self-curing, with excellent adhesion to cementitious surfaces including plaster, concrete, screed, cement mortar beds and existing tiles. High compressive strength (>10 N/mm²) and shear strength (>0.8 N/mm²). Suitable for ceramic, vitrified, glazed, mosaic, stone, granite and marble tiles on internal and external, vertical and horizontal surfaces.

TILEX 351 PLUS is a high-performance polymer-modified, thin-set tile adhesive for floors and walls — single component, just add water. Engineered for large-format tiles, vitrified tiles, and tile-on-tile applications, with anti-slip performance on vertical surfaces and proven bond strength to ANSI A118.4, EN 12004 C2 TE, and IS 15477:2019. For demanding external wall installations, gauge with URPAdmix 73 in place of water for added elasticity and tensile strength.

Two component highly flexible adhesive for tile-on-tile applications. Complies with ANSI A 118.4, EN 12004 D2TES2.

TILEX Epoxy Stain Free 100 is an easy-to-use, stain-free, colour-fast, chemical and temperature-resistant, highly durable 100% epoxy tile grout for ceramic tiles, vitrified tiles, marble and stone. A three-part system (Part A + Part B + Part C filler powder) that is self-compacting and self-levelling — for floor and wall tiling in kitchens, cafeterias, restrooms, wash areas, swimming pools, and all interior and exterior applications where chemical resistance and permanent stain protection are required.

TILEX 353 is a multipurpose, high-performance, elastic polymer tile adhesive with no vertical slip on deformable surfaces. Available in grey and white, it complies with ANSI A118.4, EN/ISO C2TES1 and IS 15477:2019 — combining C2 (improved) performance with extended open time (T), extended workability (E) and high initial tensile adhesion (S1). Bonds large format tiles and natural stone on interior and exterior floors and walls, including deformable, heated and difficult substrates. TILEX URP ADMIX can replace water to further enhance bond strength and flexibility.

Quick Epoxy Bonding Stone Adhesive for Large Format Tiles, Marbles, Granites and Ceramic Tiles. Easy to mix 1:1 ratio, durable permanent bond, non-staining — ideal for white and light color marbles. Fast permanent bond in 15–30 minutes. Available in 500g, 1, 2, 10 and 20 Kg packs.

High performance UNSANDED POLYMER modified cementitious Tile Grout. Designed for interior and exterior use. Color-fast, highly water resistant, weather resistant and stain resistant. Non-shrinking, smooth and glossy finish. Coverage: 4–4.5 Sq.Mtrs per Kg for 150mm x 150mm tile size.

High performance SANDED POLYMER modified cementitious Tile Grout. Suitable for wider tile joints where sanded formulation provides better joint filling and strength. Polymer modification provides improved water resistance, flexibility, and durability for demanding applications.

High Performance Latex Additive for Cementitious Sanded and Unsanded Grout for Tile Joints. Replace water partially or fully with TILEX URP ADMIX 73 for dense, color-fast grout joints. Also recommended as admix with tile adhesives. Provides high shear bond strength and excellent exterior and submerged performance.

High Performance Latex Liquid Admixture for Cement Grout for Tile Joint. Dosage: 200–250ml per bag of 50 kgs cement. Premium latex admix that significantly improves performance of cement grouts for all tile, brick, marble, natural stone, and agglomerate stone installations.

TILEX 512 is a high-performance two-component polyurethane hybrid adhesive for installing large format tiles and stones on specialist substrates including drywalls, gypsum boards, cement backer boards, marine plywood, MDF, MIVAN concrete and calcium silicate boards — as well as standard concrete and masonry. Exceeds ANSI A118.4, EN 12004 D2TES2 and IS 15477 Type 4TS2 requirements by wide margins: ≥5.0 N/mm² initial shear strength (vs 2.0 N/mm² required) and ≥30mm deformability (vs 5mm required). Two components, 1:3 mixing ratio, 30-minute open time. Suitable for interior and exterior floors and walls.

Tiles and Floors Stains Cleaning and De-greasing Agents. Range of specialist cleaners: AC (Acid Cleaner), DA (De-greasing Agent), LC (Light Cleaner). Effectively removes cement haze, grout residue, rust stains, oil, grease, and general floor staining from all tile types.

ALSTRONG ZP 777 is a high-performance, zinc-rich primer for anti-corrosion protection and rust conversion on steel and iron. Highly penetrative, it encapsulates rust and delivers excellent adhesion and bonding to steel and concrete structures, while protecting against aggressive corrosion, industrial pollution, coastal environments, chemical attacks, weathering and water. Suitable for brush and spray application, and overcoatable with rubber, acrylic, PU, epoxy and water dispersion coatings.

ALSTRONG AC is a polyurethane-blended, long-lasting corrosion preventive coating for the protection of exposed steel reinforcement and iron. Self-priming and tolerant of lower grades of steel preparation — it penetrates into existing rust to combine it with the coating all the way down to the original metal surface. Provides excellent resistance to corrosion, chemicals and weathering in industrial, coastal and chemical environments. Also used as an anti-carbonisation coat on exterior and internal concrete structures to prevent CO₂-induced reinforcement corrosion. Fully compatible with the ROOFBOND and ROOFCRETE concrete repair systems.

Rust Remover for steel and iron surfaces.

ALSTRONG RC is a high-performance, self-priming rust converter and rust encapsulating coating for the protection of steel and iron against aggressive corrosion, industrial pollution, coastal environments, chemical attacks and weathering. When applied to a rusty steel surface, it chemically stabilises and converts adhering rust into an organo-complex compound within 30 minutes — forming a tough, porous, moisture-repelling coating with good mechanical stability, abrasion resistance, bond strength and excellent anti-corrosive properties. Salt spray resistance of 340 hours at 25 microns (ASTM B 117). Can be immediately overcoated with concrete, mortar, rubber, acrylic, PU, epoxy or water dispersion coatings.

Two Component Zinc Rich Anti Corrosive Epoxy Primer for steel and iron protection. High performance two-component zinc-rich primer providing galvanic protection to steel structures. Superior corrosion resistance for industrial, coastal, and chemical environments.

Fire Resistant Coatings for structural steel and concrete surfaces. Provides passive fire protection by insulating structural members from high temperatures. Intumescent or cementitious formulations available for different fire rating requirements.

SHINESHIELD Interior Emulsion is a high-performance, high-shine interior emulsion paint formulated with special co-polymers, fine pigments and functional additives — anti-fungal, anti-algae and anti-fading. Delivers excellent durability, good washability, smooth pleasing finish and exceptional whiteness on interior walls, ceilings, plasters, brick and asbestos surfaces. Water-based, non-flammable and low VOC (<50 g/L). Tintable to any shade with stainers.

High performance pure acrylic exterior paint. Outstanding protection with waterproofing & anti-carbonation properties.

High performance Weatherproof & Seep Shield Exterior Emulsion. 5-8 year performance warranty.

Polymer Blended Water Thinnable White Cement Primer. Alkali resistant, strong adhesion undercoat.

SHINESHIELD Premium Interior Emulsion is a high-performance, excellent-shine premium interior emulsion paint formulated with special co-polymers, fine pigments and functional additives — anti-fungal, anti-algae and anti-fading. Available in more than 500 shades through Armstrong's Paint Colours Spectra. Delivers a smooth sheen finish with exceptional whiteness, good washability and excellent durability on interior walls, ceilings, plasters, brick and asbestos surfaces. Water-based, non-flammable, low VOC (<50 g/L). Tintable to any colour with stainers.

A Unique Superficial, High Shine Interior ULTIMATE PREMIUM Hi-Decor Emulsion Paint. Top-tier interior emulsion with maximum sheen, superior colour retention, washability, and Hi-Decor finish. Formulated for premium residential and commercial interiors requiring the finest wall finish.

A Unique Superficial, High Shine, WEATHERPROOF Exterior PREMIUM Emulsion Paint. High performance pure acrylic exterior system with outstanding protection. Innovative sun block technology reflects 90% of sunrays, reducing surface temperature. Resistant to fungus, algae, chalking, and flaking.

High Performance Polyurethane & Polymer Blended Elastomeric White Waterproof Primer for exterior use. With excellent bonding and UV resistance, ideal as undercoat primer for any polyurethane polymer paint and membrane coatings. Coverage: 1 Ltr with 20% water — 60 Sq.ft per Ltr.

SHINESHIELD WP 305 is a single-component, ready-to-use, water-based acrylic-polyurethane blended primer and sealer for exterior wall coating applications. Water-based, solvent-free and very low VOC — it penetrates and seals concrete, masonry, fibre cement and brick substrates, improves adhesion of decorative and waterproof topcoats, and remains permeable to water vapour to prevent moisture entrapment behind exterior finishes. Ready to overcoat in 2–3 hours at 30°C. Apply by spray, brush or medium nap roller.

ROOFBOND BCS PRIME 501 is a high-performance, single-component acrylate penetrative water barrier primer based on acrylic co-polymers, flame retardants, blocking sealers and graded filler surfactants in aqueous dispersion. With ambient crosslinking technology, it consolidates and standardises surface absorption on concrete, masonry, cement, lime, gypsum, plaster boards and screeds — while reducing chemical ingress by 96% and maintaining breathability. Applied by brush or spray at 4–5 sq.m per litre. For industrial floorings, roads and waterproofing systems; can be mixed with cement for GEO fabric and fibre mesh applications.

High performance White Cement based Waterproof Wall Putty. Premium quality white cement wall putty providing excellent whiteness, smoothness, and waterproof properties. Applied as a base coat before paint to fill surface imperfections and provide a smooth, uniform, water-resistant base.

SUMMERSHIELD COOL 666 is a Nano UV protected, micro-fibre reinforced, 100% pure acrylic-polyurethane blended solar reflective, heat-reducing and waterproof coating with IR reflective pigments. It reflects 90% of solar infrared rays and 85% of UV rays, achieves a Solar Reflective Index of 113, and reduces energy consumption by up to 30% in air-conditioned premises. Provides crack bridging up to 3mm, waterproof to 7 bar (ASTM C-297), and can be applied from 5°C to 50°C. Recommended for terraces, sloped roofs, MS/ACC/metal sheets and exterior walls. Step 3 topcoat in the RAINPROOF PWR 690 waterproofing system.

SUMMERPROOF COOL 644 is a 100% pure acrylic, ceramic-powder blended, solar reflective and heat-resistant waterproof coating. Single-component, easy to apply, most economical — it provides a jointless and seamless waterproof membrane with a Solar Reflective Index of 110, 87% heat reflectivity, 2mm crack bridging, and up to 25% reduction in electrical energy consumption. Can be used as its own primer at 1:0.5 dilution. For terraces, sloped roofs, ACC/GI sheets and external walls. Apply over existing cementitious, bituminous, polymer and PU-treated surfaces.

Anti Efflorescence Prime Coating. Excellent alkali and efflorescence resistance. Physical barrier to water transport and chemical barrier to salt migration. Excellent substrate penetration with high bonding to surface and topcoats. Long-life high-class appearance of topcoat. Coverage: 55–60 Sq.ft per Ltr per 2 coats.

Nano technology transparent water based Silicon water repellent. Complies with BS 3826-1969 Class A & Class B. Mix ratio with water 1:10. Excellent transparent coating protecting concrete and mortar surfaces from salts and acids. Fills hairline cracks up to 0.4mm. Prevents efflorescence, high breathability and micro porous.

Solvent based Silicon water repellent for direct application. Complies with BS 3826-1969 Class A & Class B. High performance solvent-borne silicone providing deep penetrating water repellency to concrete, masonry, and natural stone. Applied directly without dilution.

CONPROOF EP is a two-component, food neutral, water thinnable epoxy resin waterproof and damp proof coating — safe, non-toxic and non-flammable. Compliant with ASTM-C-881 and EN 13813, it forms a hard, tough, strong film with excellent resistance to positive hydrostatic water pressure, salt water, dilute acids, alkalies and other chemicals. White in colour and tintable with any colour pigments, it can be overcoated by solvent-based or water-based paints. Applied on damp or dry surfaces for water tanks, damp walls, terraces, food industry and hatchery applications.

Heavy Duty Liquid Floor Hardening Admixture. 4x abrasion resistance of plain concrete. For industrial flooring, railways.

High abrasion resistant floor hardener for heavy traffic areas - loading bays, workshops, ramps.

Solvent free high strength weather resistant epoxy self leveling floor coating.

Acid resistant Epoxy coating for Floors & Walls in chemical environments.

Metallic monolithic surface floor hardener. Applied directly to green concrete to provide a hard, dense, metallic surface with maximum abrasion resistance. Suitable for the heaviest industrial traffic applications including loading bays, machine shops, ramps, and steel industries.

Heavy Duty Colour Floor Hardener. Dry shake non-metallic colour floor hardener with graded non-metallic aggregate coloured in a high strength cementitious acrylic binder. Four times abrasion resistance of plain concrete. Available in general colour shades. Apply at 6–12 Kg per Sq.mtr over green concrete.

Epoxy based Static Conductive / Dissipative seamless floor toppings. Specialist two-component epoxy flooring system providing ESD (electrostatic discharge) protection. Essential for electronic manufacturing, data centres, operating theatres, and areas requiring strict static control.

Epoxy Resin based Low to Medium build chemical and abrasion resistant floor coating. Two-component solvent-free epoxy providing excellent chemical resistance for industrial environments. Suitable for food processing, chemical plants, warehouses, and manufacturing facilities.

High build Epoxy resin floor Coating. Heavy duty two-component high build epoxy providing maximum protection for the most demanding industrial environments. Thick film build of 400–2000 microns providing superior chemical, mechanical, and abrasion resistance.

ALSTRONG FSL 55 is a single-pack, polymer-enhanced cementitious self-levelling floor topping laid at 6–12mm in one pour. Mixed with water on site, the graded cement and aggregate blend turns into a free-flowing mortar that finds its own level and finishes to a clean, chamfered edge. Compressive strength reaches 20 N/mm² within a day and 35 N/mm² at 28 days, with 9 N/mm² flexural strength and the top Class A impact-resistance band under BS 8204 — built for warehouse, light-engineering and car-park floors, including slabs carrying rising damp.

1.5 to 3mm Self smoothing water based epoxy floor topping. Water-borne two-component epoxy self-smoothing system providing a hard, durable, chemical resistant finish. Low VOC formulation suitable for occupied buildings and sensitive environments.

ROOFCRETE AR is a two-component, pre-packed, high-build polymer-modified structural reinstatement mortar. Part 1 (polymer liquid) is mixed with Part 2 (fibre-reinforced powder) at the exact factory-set ratio — no site batching, no dosage errors. Achieves 13 N/mm² compressive strength at 1 day, 48 N/mm² at 28 days and 9 N/mm² flexural strength. NIL chloride, NIL carbonation and 0.40% water absorption make it fully reinforcement-safe. For structural repair depths of 6–100 mm on columns, beams, slabs and spalled concrete.

ROOFCRETE AR 576 is a high-build polymer-modified structural reinstatement mortar for concrete repairs from 6–100mm. It develops 13 N/mm² compressive strength at 1 day and 48 N/mm² at 28 days, with 9 N/mm² flexural strength, zero carbonation penetration, zero chloride-ion diffusion and 0.40% water absorption.

ROOFCRETE URP is a high-performance, multipurpose SBR (Styrene Butadiene Rubber) latex-based repair and waterproofing product compliant with BS 6319 Part 2:1983 and ASTM C190-85. One product, three functions: as a bonding agent between old and new concrete, as a polymer modifier improving repair mortar strength and flexibility, and as a two-coat waterproofing slurry coating. Improves hardness, flexural strength, abrasion resistance and corrosion resistance. For terraces, toilets, chajjas, RCC member repairs, masonry walls, waterproofing mortars, tile bedding and re-fixing stone and marble.

Ready mix Cement Concrete Dry Powder. Pre-proportioned dry mix concrete for site use — just add water and mix. Consistent quality, controlled aggregate grading, and designed cement content for structural and non-structural concrete applications.

Ready mix Cement Plaster Dry Powder. Pre-proportioned dry mix plaster for interior and exterior walls — just add water and mix. Consistent quality, controlled sand grading, and designed cement content for uniform, crack-resistant plaster finish.

Soil Modifier / Stabiliser and Lower water permeability system for Roads, Bridges and Dams. Highly resistant to soil deformation. Excellent retention capacity maintaining dry CBR in wet conditions. Controls erosion of soils in slopes and shoulders. Eliminates capillary rise. Also available as ALSTRONGSEAL.

Road Marking Paint for highways, car parks, warehouses, and industrial floors. High visibility, durable marking paint formulated for excellent adhesion to concrete and asphalt surfaces. Fast drying for minimal traffic disruption.

High Strength, Weather and Abrasion resistant acrylic penetrative concrete road and industrial floor top coating. Provides protective surface treatment for concrete roads, pavements, and industrial floors. Penetrates into concrete surface to strengthen and protect against weathering and traffic wear.

Highly Multi-purpose Grade concrete bonding agent for Roads and Industrial floors. High performance bonding agent specifically designed for road repair and industrial floor overlays. Ensures excellent bond between new concrete overlay and existing substrate for durable long-lasting repairs.

High early strength concrete plasticizer for Roads, Pavements, Runways and Industrial floors — minimises curing period. Specially formulated plasticizer enabling rapid strength gain in concrete for road and pavement applications where early return to service is critical.

High strength Heat resistant Fibre reinforced PU Blended Acrylic Elastomeric liquid waterproof membrane system.

High Abrasion Heat Resistant Fibre reinforced Polyurethane 3rd Generation Elastomeric waterproof system.

High performance Fibre reinforced Acrylic Elastomeric waterproof membrane 5 Layer System for terraces, roofs, and podiums. Five integrated layers deliver seamless crack-bridging protection with excellent UV and weather resistance.

High performance Polyurethane Acrylic Hybrid waterproofing 5 Layer System for roofs, terraces, and podiums. Combines the elasticity of polyurethane with the UV stability of acrylic for superior abrasion resistance and long-term waterproof integrity.

Premium Polyurethane Hybrid waterproofing 5 Layer System for roofs, basements, and podiums. Five integrated layers with fibre reinforcement deliver elastic crack-bridging membrane protection that is UV-stable and durable in extreme weather conditions.

High performance Fibre reinforced Acrylic Elastomeric waterproofing 5 Layer System for concrete roofs, basements, and structures. Five integrated layers provide seamless flexible durable membrane protection with excellent adhesion to concrete and masonry substrates.

Heavy duty Abrasion resistant Heat Reflective Fibre reinforced Hybrid acrylic elastomeric waterproof system.

High Performance Fibre reinforced Polyurethane Advanced Technology Elastomeric waterproof system. Complies with ASTM G-154.