New: Kerala distributor meet recap
ReadProtective & Anti-Efflorescence Coatings
Transparent, water based nano technology silicon water repellent that complies with BS 3826-1969 Class A & Class B and fills hairline cracks up to 0.4 mm.
Nano technology transparent water based Silicon water repellent. Complies with BS 3826-1969 Class A & Class B. Mix ratio with water 1:10. Excellent transparent coating protecting concrete and mortar surfaces from salts and acids. Fills hairline cracks up to 0.4mm. Prevents efflorescence, high breathability and micro porous.
Figures are controlled laboratory results. Actual site performance varies with substrate, temperature, humidity, application method and workmanship — please confirm the current product datasheet before specification.
RAINCARE WR is a silicone water repellent made with nano technology, water based and transparent, so it does not change the appearance of the surface. It is diluted with clean water and applied by brush, roller or low-pressure spray. The treated surface stays breathable and micro-porous, which is why it suits breathable waterproofing of facades and stone.
Protects concrete and mortar surfaces from salts and acids.
Transparent, so the stone keeps its natural appearance after treatment.
Prevents efflorescence while the brickwork stays breathable and micro-porous.
Does not change the look of the treated heritage surface.
Fills hairline cracks up to 0.4 mm in the concrete surface.
UV resistant repellent applied wet-on-wet in two coats.
For water seepage in wall surfaces outdoors, dilute RAINCARE WR with clean water in a 1:10 ratio and apply generously. It complies with BS 3826-1969 Class A & Class B, fills hairline cracks up to 0.4 mm and prevents efflorescence. As a transparent water repellent it leaves brick, stone and concrete looking the same. Apply the second coat while the first is still wet, then allow 24 hours of curing before rain or water reaches the surface.
Armstrong Chemicals supplies RAINCARE WR to sites across Telangana, Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, including Hyderabad, Vijayawada, Bengaluru, Kochi and Chennai.
The coating is transparent and does not change how the surface looks, which matters on natural stone and heritage buildings.
The treated surface stays breathable and micro-porous while it repels water and prevents efflorescence.
It fills hairline cracks up to 0.4 mm, closing small openings in concrete and mortar surfaces.
Ensure surface is clean, dry, and free from loose particles and contamination
Dilute RAINCARE WR with clean water in 1:10 ratio
Apply diluted solution generously by brush, roller, or low-pressure spray
Apply first coat and allow to penetrate into the substrate
Apply second coat while first coat is still wet (wet-on-wet method)
Do not allow first coat to dry before applying second coat
Allow 24 hours curing before exposing to rain or water
Coverage estimation is not applicable for this product. Please contact our team for application guidance.
Full specifications, application systems, layering guides, and coverage tables.
Request a quote and your nearest Armstrong distributor will contact you directly.
Anti Efflorescence Prime Coating. Excellent alkali and efflorescence resistance. Physical barrier to water transport and chemical barrier to salt migration. Excellent substrate penetration with high bonding to surface and topcoats. Long-life high-class appearance of topcoat. Coverage: 55–60 Sq.ft per Ltr per 2 coats.
View DetailsSolvent based Silicon water repellent for direct application. Complies with BS 3826-1969 Class A & Class B. High performance solvent-borne silicone providing deep penetrating water repellency to concrete, masonry, and natural stone. Applied directly without dilution.
View DetailsCONPROOF EP is a two-component, food neutral, water thinnable epoxy resin waterproof and damp proof coating — safe, non-toxic and non-flammable. Compliant with ASTM-C-881 and EN 13813, it forms a hard, tough, strong film with excellent resistance to positive hydrostatic water pressure, salt water, dilute acids, alkalies and other chemicals. White in colour and tintable with any colour pigments, it can be overcoated by solvent-based or water-based paints. Applied on damp or dry surfaces for water tanks, damp walls, terraces, food industry and hatchery applications.
View Details