New: Kerala distributor meet recap
ReadProtective & Anti-Efflorescence Coatings
Anti efflorescence prime coating that blocks water transport and salt migration, brushed on in two coats at 55–60 Sq.ft per Ltr before the topcoat.
Anti Efflorescence Prime Coating. Excellent alkali and efflorescence resistance. Physical barrier to water transport and chemical barrier to salt migration. Excellent substrate penetration with high bonding to surface and topcoats. Long-life high-class appearance of topcoat. Coverage: 55–60 Sq.ft per Ltr per 2 coats.
Figures are controlled laboratory results. Actual site performance varies with substrate, temperature, humidity, application method and workmanship — please confirm the current product datasheet before specification.
RAPIDSTRONG SALT FLUSHER is an anti efflorescence primer, brushed on concrete, plaster, brick and masonry as a pre-treatment before the topcoat. It works as a physical barrier to water transport and a chemical barrier to salt migration. Use it as a salt barrier coating wherever white deposits tend to come through paint.
Alkali resistant prime coat applied before the topcoat goes on.
Brush on two coats once the plaster is dry and clean.
Goes deep into brick and masonry and bonds well to the surface.
Bonds to both the wall and the topcoat applied over it.
Chemical barrier to salt migration keeps white deposits off the topcoat.
Physical barrier to water transport on below-ground wall surfaces.
If you have a damp wall with salt deposits, wire brush off all loose particles and let the surface dry first. Two brush coats cover 55–60 Sq.ft per Ltr, at a DFT of 30–40 microns per coat. Allow a minimum of 4 hours before the second coat, which goes on perpendicular to the first. As an alkali resistant primer it bonds well to the wall and to topcoats. Wait a minimum of 24 hours before applying the topcoat.
Armstrong Chemicals supplies RAPIDSTRONG SALT FLUSHER to sites across Telangana, Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, including Hyderabad, Vijayawada, Bengaluru, Kochi and Chennai.
It forms a physical barrier to water transport and a chemical barrier to salt migration, the two things behind white salt deposits.
Excellent penetration into concrete, plaster and brick gives a high bond to the wall surface.
High bonding to topcoats helps the paint finish keep its appearance for longer.
Remove all loose particles with wire brush and clean surface thoroughly
Ensure surface is dry and free from oil, grease, and contamination
Apply first coat of RAPIDSTRONG SALT FLUSHER by brush
Allow first coat to penetrate and dry — minimum 4 hours
Apply second coat perpendicular to first coat
Allow full drying — minimum 24 hours before applying topcoat
Coverage: 55–60 Sq.ft per Ltr per 2 coats
Enter your surface area to estimate how much RAPIDSTRONG SALT FLUSHER you need. Coverage rate: 55 sq.ft per litre per coat.
Full specifications, application systems, layering guides, and coverage tables.
Request a quote and your nearest Armstrong distributor will contact you directly.
Nano technology transparent water based Silicon water repellent. Complies with BS 3826-1969 Class A & Class B. Mix ratio with water 1:10. Excellent transparent coating protecting concrete and mortar surfaces from salts and acids. Fills hairline cracks up to 0.4mm. Prevents efflorescence, high breathability and micro porous.
View DetailsSolvent based Silicon water repellent for direct application. Complies with BS 3826-1969 Class A & Class B. High performance solvent-borne silicone providing deep penetrating water repellency to concrete, masonry, and natural stone. Applied directly without dilution.
View DetailsCONPROOF EP is a two-component, food neutral, water thinnable epoxy resin waterproof and damp proof coating — safe, non-toxic and non-flammable. Compliant with ASTM-C-881 and EN 13813, it forms a hard, tough, strong film with excellent resistance to positive hydrostatic water pressure, salt water, dilute acids, alkalies and other chemicals. White in colour and tintable with any colour pigments, it can be overcoated by solvent-based or water-based paints. Applied on damp or dry surfaces for water tanks, damp walls, terraces, food industry and hatchery applications.
View Details