New: Kerala distributor meet recap
ReadTile Adhesives, Grouts & Cleaners
Latex liquid admixture dosed at 200–250 ml per 50 kg bag of cement to improve the bond, flexibility and waterproofing of cement grout.
High Performance Latex Liquid Admixture for Cement Grout for Tile Joint. Dosage: 200–250ml per bag of 50 kgs cement. Premium latex admix that significantly improves performance of cement grouts for all tile, brick, marble, natural stone, and agglomerate stone installations.
Figures are controlled laboratory results. Actual site performance varies with substrate, temperature, humidity, application method and workmanship — please confirm the current product datasheet before specification.
TILEX SUPERLATEX 333 is a latex admixture for cement grout used in tile joints. It is a liquid that you stir into the mixing water before the cement or grout powder goes in. Used as a tile grout latex, it improves the grout for tile, brick, marble, natural stone and agglomerate stone installations.
Added to the grout water for ceramic and vitrified tile joints.
Improves bond and flexibility of cement grout in stone joints.
Compatible with cementitious grouts and mortars used on natural stone.
Mix to a smooth, lump-free grout for mosaic joints.
Improves the cement mix used in brick and masonry joints.
Listed for agglomerate stone installations with cement grout.
As a cement grout additive for tiles, the dosage is 200–250 ml per 50 kg bag of cement. It improves bond, flexibility and waterproofing and is compatible with all cementitious grouts and mortars, so it acts as a polymer for cement grout on any tile type. Mix the latex with the water first, then add the powder and mix until smooth and lump-free. Apply to clean, dry joints with a rubber float.
Armstrong Chemicals supplies TILEX SUPERLATEX 333 to sites across Telangana, Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, including Hyderabad, Vijayawada, Bengaluru, Kochi and Chennai.
Latex added to plain cement grout improves bond strength in every type of tile joint.
The admixture improves the flexibility of the cement grout, so the joints are less rigid.
It improves the waterproofing performance of standard cement grout used in tile joints.
Add 200–250ml of TILEX SUPERLATEX 333 per 50kg bag of cement to mixing water
Mix latex admix with water before adding to cement powder
Add cement/grout powder to the liquid mixture and mix thoroughly
Achieve smooth lump-free consistency before application
Apply grout to clean dry tile joints using rubber float
Remove excess grout from tile surface promptly
Clean and cure as per standard grout application procedure
Coverage estimation is not applicable for this product. Please contact our team for application guidance.
Full specifications, application systems, layering guides, and coverage tables.
Request a quote and your nearest Armstrong distributor will contact you directly.
TILEX 350 Tile Adhesive is a thin-set polymer modified cementitious tile and stone adhesive compliant with IS 15477-2004 minimum Type 1. Single component — just add water. Non-shrink, self-curing, with excellent adhesion to cementitious surfaces including plaster, concrete, screed, cement mortar beds and existing tiles. High compressive strength (>10 N/mm²) and shear strength (>0.8 N/mm²). Suitable for ceramic, vitrified, glazed, mosaic, stone, granite and marble tiles on internal and external, vertical and horizontal surfaces.
View DetailsTILEX 351 PLUS is a high-performance polymer-modified, thin-set tile adhesive for floors and walls — single component, just add water. Engineered for large-format tiles, vitrified tiles, and tile-on-tile applications, with anti-slip performance on vertical surfaces and proven bond strength to ANSI A118.4, EN 12004 C2 TE, and IS 15477:2019. For demanding external wall installations, gauge with URPAdmix 73 in place of water for added elasticity and tensile strength.
View DetailsTwo component highly flexible adhesive for tile-on-tile applications. Complies with ANSI A 118.4, EN 12004 D2TES2.
View Details