New: Kerala distributor meet recap
ReadTile Adhesives, Grouts & Cleaners
Two component quick epoxy stone adhesive, mixed 1:1, that gives a permanent, non-staining bond on marble, granite and large format tiles in 15–30 minutes.
Quick Epoxy Bonding Stone Adhesive for Large Format Tiles, Marbles, Granites and Ceramic Tiles. Easy to mix 1:1 ratio, durable permanent bond, non-staining — ideal for white and light color marbles. Fast permanent bond in 15–30 minutes. Available in 500g, 1, 2, 10 and 20 Kg packs.
Figures are controlled laboratory results. Actual site performance varies with substrate, temperature, humidity, application method and workmanship — please confirm the current product datasheet before specification.
TILEX EPOXY ES 301 is an epoxy stone adhesive in two parts that you mix in equal proportions until the colour is even. You apply it to the back of the tile or to the surface and press the piece into place. It is used as a marble adhesive and for granite, ceramic and large format tiles.
Bonds large format tiles with a fast permanent bond.
Non-staining, so it suits white and light colour marbles.
Fixes ceramic tiles on both vertical and horizontal surfaces.
Bonds tile and stone to clean brick and masonry.
Apply to the tile back or the board, then press firmly.
Steel must be cleaned of oil, dust and oxidation first.
For anyone asking how to fix marble on wall surfaces, the working figures are simple. Mix Part A and Part B 1:1, adjust the piece within 15 minutes and expect a permanent bond in 15–30 minutes. As a quick set epoxy for tiles it is non-staining. Packs are 500 g, 1, 2, 10 and 20 kg. Allow 24 hours before grouting and 48 hours before applying loads.
Armstrong Chemicals supplies TILEX EPOXY ES 301 to sites across Telangana, Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, including Hyderabad, Vijayawada, Bengaluru, Kochi and Chennai.
Part A and Part B go together 1:1, which is easy to measure correctly on site.
It does not stain the stone, which makes it suitable for white and light colour marbles.
The bond forms in 15–30 minutes and is permanent, so pieces need support only until initial cure.
Ensure surface is clean and free from oil, dust, oxidation and bond inhibiting materials
Mix Part A and Part B in equal proportions (1:1) until homogeneous colour
Apply mixed adhesive to the back of the tile or to the substrate
Press tile firmly into position immediately after application
Adjust position within 15 minutes before initial set
Hold in position or support until adhesive achieves initial cure
Allow 24 hours before grouting and 48 hours before applying loads
Coverage estimation is not applicable for this product. Please contact our team for application guidance.
Full specifications, application systems, layering guides, and coverage tables.
Request a quote and your nearest Armstrong distributor will contact you directly.
TILEX 350 Tile Adhesive is a thin-set polymer modified cementitious tile and stone adhesive compliant with IS 15477-2004 minimum Type 1. Single component — just add water. Non-shrink, self-curing, with excellent adhesion to cementitious surfaces including plaster, concrete, screed, cement mortar beds and existing tiles. High compressive strength (>10 N/mm²) and shear strength (>0.8 N/mm²). Suitable for ceramic, vitrified, glazed, mosaic, stone, granite and marble tiles on internal and external, vertical and horizontal surfaces.
View DetailsTILEX 351 PLUS is a high-performance polymer-modified, thin-set tile adhesive for floors and walls — single component, just add water. Engineered for large-format tiles, vitrified tiles, and tile-on-tile applications, with anti-slip performance on vertical surfaces and proven bond strength to ANSI A118.4, EN 12004 C2 TE, and IS 15477:2019. For demanding external wall installations, gauge with URPAdmix 73 in place of water for added elasticity and tensile strength.
View DetailsTwo component highly flexible adhesive for tile-on-tile applications. Complies with ANSI A 118.4, EN 12004 D2TES2.
View Details