What is ARMSTRONG FL/SL 1000 used for?

ARMSTRONG FL/SL 1000 is used for Pharmaceutical plants, Electronic factories, Clean rooms. Solvent free high strength weather resistant epoxy self leveling floor coating.

Is ARMSTRONG FL/SL 1000 available across India?

Yes, ARMSTRONG FL/SL 1000 is manufactured and supplied by Armstrong Chemicals Pvt. Ltd. across India. Contact us at 80956 21122 or 1800 103 2034 (toll-free) for bulk quotes, dealer locations, and technical support.

What does N/mm² (or MPa) mean on this product?

N/mm² (newtons per square millimetre) is the same unit as MPa (megapascal) and measures how much force a material can withstand per unit area — its strength. As a reference, standard structural concrete (M20 grade) has a compressive strength of about 20 N/mm², M30 concrete about 30 N/mm², and high-performance concrete 50–70 N/mm². For adhesion or tensile values, anything above 1.0 N/mm² is considered a strong structural bond — most site failures occur below 0.5 N/mm². Higher values indicate a tougher, more durable material or a stronger bond to the substrate.

New: Kerala distributor meet recap

Read

Back to All Products

Home/Products/Floor Hardeners & Epoxy Floors/ARMSTRONG FL/SL 1000Floor Hardeners & Epoxy Floors

ARMSTRONG FL/SL 1000

Floor Hardeners & Epoxy Floors

Solvent Free

High Gloss

Self-Leveling

High Strength

Floor Hardeners & Epoxy Floors

ARMSTRONG FL/SL 1000

Solvent free, high strength epoxy self leveling floor coating with a high gloss finish and compressive strength above 60 MPa.

Epoxy floor for showroom
Clean room flooring
Pharmaceutical plant floors
Electronics factory floors

Solvent free high strength weather resistant epoxy self leveling floor coating.

Specifications

TypeEpoxy Self-Leveling Floor

ComponentsTwo Component

DFT2–3 mm

Compressive Strength> 60 MPa

Chemical ResistanceGood

FinishHigh Gloss

Figures are controlled laboratory results. Actual site performance varies with substrate, temperature, humidity, application method and workmanship — please confirm the current product datasheet before specification.

Where to use ARMSTRONG FL/SL 1000: epoxy self levelling flooring for clean spaces

ARMSTRONG FL/SL 1000 is an epoxy self levelling flooring system in two components, solvent free and high strength. The floor is prepared by grinding or shot blasting and given an epoxy primer coat. The mixed compound is then poured and spread with a notched squeegee to give a high gloss epoxy floor.

Pharmaceutical plants
Solvent free, self leveling floor with good chemical resistance.
Electronic factories
Poured and spread with a notched squeegee at 2–3 mm.
Clean rooms
High gloss finish over a ground or shot blasted floor.
Showrooms
High gloss, high strength floor coating for display areas.
Commercial lobbies
Ready for light traffic 24 hrs after pouring.

If you need an epoxy floor for a showroom or lobby, the dry film thickness is 2–3 mm with a high gloss finish. Compressive strength is above 60 MPa and chemical resistance is stated as good. As a solvent free epoxy floor it is also listed for pharmaceutical plants and clean rooms. Allow 24 hrs before light traffic.

Armstrong Chemicals supplies ARMSTRONG FL/SL 1000 to sites across Telangana, Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, including Hyderabad, Vijayawada, Bengaluru, Kochi and Chennai.

Why ARMSTRONG FL/SL 1000 works

Self-levelling compound
The mixed compound is poured and spread with a notched squeegee, then levels itself into a 2–3 mm floor.
High compressive strength
Compressive strength above 60 MPa makes this a high strength floor for plants, factories and lobbies.
High gloss finish
The finish is high gloss, a fit for the showrooms and commercial lobbies listed among its uses.