RAPIDSTRONG NH 89

Where to use RAPIDSTRONG NH 89: non metallic floor hardener for heavy traffic

RAPIDSTRONG NH 89 is a non metallic floor hardener with high abrasion resistance for heavy traffic areas. It is a dry shake floor hardener, spread evenly over fresh concrete once the bleed water disappears, then power floated to a smooth, dense finish. It comes in Grey, Red and Green.

• Loading bays

  Dry shake surface hardener for heavy traffic at loading bays.

• Workshop floors

  8x the abrasion resistance of plain concrete for workshop wear.

• Ramps & slopes

  Spread evenly on fresh concrete, then power floated dense.

• Parking areas

  Available in Grey, Red and Green for parking floors.

• Heavy vehicle traffic areas

  Applied at 3–5 kg per sq.m on fresh concrete.

For workshop floor surface wear and damage at loading bays, the stated abrasion resistance is 8x that of plain concrete. Coverage is 3–5 kg per sq.m as a surface hardener on fresh concrete. Grey, Red and Green options make it a coloured floor hardener as well. Pour and level the slab, apply the dry shake when the bleed water disappears, power float, then apply curing compound.

Armstrong Chemicals supplies RAPIDSTRONG NH 89 to sites across Telangana, Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, including Hyderabad, Vijayawada, Bengaluru, Kochi and Chennai.

Why RAPIDSTRONG NH 89 works

• 8x abrasion resistance

  The surface is stated to resist abrasion 8x better than plain concrete, which suits heavy traffic areas.

• Dry shake on fresh concrete

  Applied when the bleed water disappears and power floated in, it is worked into a smooth, dense finish.

• Colour in the hardener

  Grey, Red and Green options let you colour the floor with the same material that hardens it.