New: Kerala distributor meet recap
ReadFloor Hardeners & Epoxy Floors
Two-component, solvent free epoxy floor coating of low to medium build, 200–400 microns, with chemical and abrasion resistance for industrial floors.
Epoxy Resin based Low to Medium build chemical and abrasion resistant floor coating. Two-component solvent-free epoxy providing excellent chemical resistance for industrial environments. Suitable for food processing, chemical plants, warehouses, and manufacturing facilities.
Figures are controlled laboratory results. Actual site performance varies with substrate, temperature, humidity, application method and workmanship — please confirm the current product datasheet before specification.
ARMSTRONG LBF 350 is an epoxy floor coating of low to medium build, made as a two-component, solvent free system. Part A and Part B are mixed in the specified ratio, allowed their induction time, then applied by squeegee or roller in a uniform film. A second coat follows once the first reaches minimum cure.
Solvent free epoxy, suitable for occupied or sensitive environments.
Excellent chemical resistance, fully developed after 7 days at 20°C.
Rolled or squeegeed on at 200–400 microns build.
Abrasion resistant coating for light to medium duty floors.
Applied in coats over shot blasted or ground concrete.
Anti-slip aggregate can go on the final wet coat.
As a warehouse floor coating, it builds to 200–400 microns with excellent chemical resistance and abrasion resistance. For an anti slip epoxy floor, apply anti-slip aggregate on the final coat while it is wet. Prepare the concrete by shot blasting or grinding to CSP 2–3 and repair cracks first. Full cure takes 7 days at 20°C, and chemical resistance is fully developed only after that.
Armstrong Chemicals supplies ARMSTRONG LBF 350 to sites across Telangana, Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, including Hyderabad, Vijayawada, Bengaluru, Kochi and Chennai.
Being solvent free makes it suitable for occupied or sensitive environments such as food processing facilities.
The epoxy resin film resists chemicals and abrasion, with full chemical resistance developed after 7 days at 20°C.
Anti-slip aggregate can be broadcast onto the final coat while wet to give slip resistance where required.
Prepare concrete surface by shot blasting or grinding to CSP 2–3
Repair surface defects and cracks with epoxy repair mortar
Mix Part A and Part B in specified ratio and allow induction time
Apply mixed epoxy by squeegee or roller to achieve uniform film
Apply second coat after first coat achieves minimum cure
Apply anti-slip aggregate on final coat while wet if slip resistance required
Full cure: 7 days at 20°C before chemical resistance is fully developed
Coverage estimation is not applicable for this product. Please contact our team for application guidance.
Full specifications, application systems, layering guides, and coverage tables.
Request a quote and your nearest Armstrong distributor will contact you directly.
Heavy Duty Liquid Floor Hardening Admixture. 4x abrasion resistance of plain concrete. For industrial flooring, railways.
View DetailsHigh abrasion resistant floor hardener for heavy traffic areas - loading bays, workshops, ramps.
View DetailsSolvent free high strength weather resistant epoxy self leveling floor coating.
View Details