New: Kerala distributor meet recap
ReadGrouts, Anchors & Micro Concrete
A free flow, non-shrink crystalline injection grout for base plates, bolts and ducts that reaches compressive strength above 40 MPa at 28 days.
Free flow Non-shrink injection grout. Excellent Crystallization Process System for sealing capillaries and voids.
Figures are controlled laboratory results. Actual site performance varies with substrate, temperature, humidity, application method and workmanship — please confirm the current product datasheet before specification.
ROOFEX GP is a crystalline non shrink grout with a free flow consistency. You mix it with clean water, then pour it into voids or inject it under pressure, and it needs no vibration. Its crystallization process seals capillaries and voids, so it works as a free flow injection grout under plates and around bolts.
Non-shrink, so the grout stays in full contact under the plate.
Poured or injected under pressure to fill voids.
Flows under the column base without any vibration.
Free flow mix fills the space around the bolt.
Injected under pressure to fill the duct.
To grout a machine base plate, mix with clean water to a free-flow consistency and pour or inject. Shrinkage is nil and compressive strength is above 40 MPa at 28 days. As a void filling grout, the quantity depends on void volume. Allow a minimum of 24 hrs curing.
Armstrong Chemicals supplies ROOFEX GP to sites across Telangana, Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, including Hyderabad, Vijayawada, Bengaluru, Kochi and Chennai.
The grout does not shrink on curing, so it keeps complete contact with the surfaces it is placed against.
It can be poured into voids or injected under pressure without vibration to consolidate it.
The crystallization process seals capillaries and voids, which is stated as the way the grout closes them off.
Mix with clean water to free-flow consistency
Pour into voids or inject under pressure
No vibration needed
Allow minimum 24 hrs curing
Coverage estimation is not applicable for this product. Please contact our team for application guidance.
Full specifications, application systems, layering guides, and coverage tables.
Request a quote and your nearest Armstrong distributor will contact you directly.
RAPIDSTRONG GROUT EP 403 is a two-component, low-viscosity, free-flow epoxy resin grout compliant with ASTM-C-881-78, designed for filling gaps between industrial machinery base plates and concrete or steel substrates under mobile, reciprocating and dynamic loads. Non-shrink with high compressive, tensile and flexural strength — achieving up to 91 N/mm² at 7 days. Three formulations for fine gaps (0.1–10mm), medium gaps (10–70mm) and large gaps (>70mm), with filler materials supplied by Armstrong. Resistant to oil, grease, fats, mild acids, alkalies, fresh water and seawater. Used in steel works, refineries, electroplating plants, chemical plants, turbine installations and crane rail foundations.
View DetailsTwo Component Structural Grade High build Under Water Epoxy mortar/concrete for heavy load situations.
View DetailsROOFCRETE EP is a three-part, solvent-free structural epoxy concrete and mortar system — epoxy resin, amine hardener and silica filler, mixed with site-graded aggregates to form a high-strength epoxy repair concrete. Designed for reinstatement of distressed and defective concrete in deep section repairs: foundations, dams, spillways, bridges, runways and highways. Achieves 93 N/mm² compressive strength at 7 days, bonds to cement at 4 N/mm², and cures unaffected by humidity — suitable for both damp and dry surfaces.
View Details