New: Kerala distributor meet recap
ReadCuring Compounds & Accelerators
Wax based concrete curing compound that forms a moisture-retentive wax film on fresh concrete, covering 4–5 sq.m per litre.
High performance Wax Based Concrete Curing Compound. Provides maximum moisture retention on fresh concrete surfaces by forming an efficient wax film barrier. Minimises plastic shrinkage cracks, dusting, and improves surface durability for roads, slabs, and pavement applications.
Figures are controlled laboratory results. Actual site performance varies with substrate, temperature, humidity, application method and workmanship — please confirm the current product datasheet before specification.
ROOFEXCURE WX is a wax curing compound for fresh concrete, made from a paraffin wax emulsion. It is a white liquid sprayed in a fine mist straight after final finishing, while the surface is still damp. The film dries clear and holds moisture in the concrete, which makes it a fit for curing for concrete roads, slabs and pavements.
Wax film holds moisture in freshly finished road concrete.
Minimises plastic shrinkage cracks and dusting on floor slabs.
Sprayed evenly in a fine mist over fresh pavement concrete.
Applied immediately after final finishing while the deck is damp.
Moisture-retentive film that dries clear on precast elements.
Improves the surface durability of cementitious floors.
Coverage is 4–5 sq.m per litre. To limit plastic shrinkage cracks on a new slab, the wax film gives maximum moisture retention and also minimises dusting, which supports plastic shrinkage control on roads and pavements. Stir well before use and spray with a low-pressure sprayer for complete, uniform coverage. Do not apply on standing water or during rain.
Armstrong Chemicals supplies ROOFEXCURE WX to sites across Telangana, Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, including Hyderabad, Vijayawada, Bengaluru, Kochi and Chennai.
The paraffin wax emulsion dries to a film barrier that keeps moisture in the fresh concrete while it cures.
By retaining moisture it minimises plastic shrinkage cracks and dusting, and improves the durability of the surface.
The liquid is white when sprayed and the film dries to a clear, moisture-retentive barrier on the concrete.
Apply immediately after final finishing while surface is still damp — do not allow to dry
Stir well before use to ensure uniformity
Spray evenly using a low-pressure sprayer in a fine mist
Ensure complete and uniform coverage
Do not apply on standing water or during rain
Film dries to a clear, moisture-retentive barrier
Coverage estimation is not applicable for this product. Please contact our team for application guidance.
Full specifications, application systems, layering guides, and coverage tables.
Request a quote and your nearest Armstrong distributor will contact you directly.
ROOFPLAST SA 80 is a chloride-free, alkali-free liquid set accelerator for sprayed and emergency concrete. Complies with IS 9103-99 (< 0.1% chloride BS 5075, < 1% alkali). Delivers exceptionally high early strengths with initial set under 2 minutes and final set under 6 minutes at spray dosage. Freeze point -16°C, pH 2.5 — safe for prestressed and reinforced concrete when properly dosed. For tunnel and mine linings, rock support shotcrete, pre-cast concrete, cold-weather concreting, underwater foundations and emergency repairs.
View DetailsSet accelerator Admixture for sprayed concrete, shortcrete and gunite process. Complies with IS 9103-99. Converts flowable sprayed concrete into cohesive, non-sagging consistency. Provides extremely fast setting with continuous early-age strength development.
View DetailsQuick setting, rapid hardening and waterproofing compound. Complies with IS 9103-1999 and ASTM C-494 Type C. Ideal for wet mix applications where sprayed concrete converts into cohesive, non-sagging consistency. Extremely fast setting with continuous early-age strength development for thick layers.
View Details