New: Kerala distributor meet recap
ReadElastomeric Waterproof Coatings
Transparent acrylic elastomeric waterproof coating for visible surfaces such as stone cladding and decorative facades, covering 30–40 sq.ft per litre.
High Performance Acrylic Elastomeric Transparent waterproof Coating for visible surfaces.
Figures are controlled laboratory results. Actual site performance varies with substrate, temperature, humidity, application method and workmanship — please confirm the current product datasheet before specification.
RAINSEAL CLEAR 202 is a transparent waterproof coating for stone, tile and other visible surfaces. It is an acrylic elastomeric coating with a clear appearance, so the surface underneath stays on show. Stir it well and apply thin, even coats by brush or roller, which makes it a practical clear coat for facade work.
Clear coat applied thin and even by brush or roller.
Waterproofs the facade while the finish stays visible.
Clean off dust and grease, then apply 2–3 coats.
Transparent coating, so the stone remains on show.
Allow full drying between coats on these visible surfaces.
If you need to waterproof without changing colour, this clear, transparent coating covers 30–40 sq.ft per litre. It needs 2–3 coats, with a drying time of 2–4 hours. As an invisible waterproof coating it is based on acrylic polymer. Clean the surface free from dust and grease, stir well, apply a thin even coat with brush or roller and allow full drying between coats. Apply a minimum of 2 coats.
Armstrong Chemicals supplies RAINSEAL CLEAR 202 to sites across Telangana, Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, including Hyderabad, Vijayawada, Bengaluru, Kochi and Chennai.
The coating is clear, so stone, tile and decorative facades stay visible after treatment.
Elastomeric means the cured film is flexible instead of brittle on the surface it protects.
Each thin coat has a drying time of 2–4 hours, and 2–3 coats build up the waterproof film.
Clean surface free from dust and grease
Stir well before application
Apply thin even coat with brush/roller
Allow full drying between coats
Apply minimum 2 coats
Enter your surface area to estimate how much RAINSEAL CLEAR 202 you need. Coverage rate: 30 sq.ft per litre per coat.
Full specifications, application systems, layering guides, and coverage tables.
Request a quote and your nearest Armstrong distributor will contact you directly.
High Performance Elastomeric Acrylic Polymer modified cementitious Waterproof System. Tough flexible hard wearing surface, resistant to UV rays. Jointless and seamless membrane.
View DetailsROOFBOND RFX PLUS 210 is a high-performance flexible reinforced waterproof coating engineered for structures under sustained water pressure. It delivers 5–5.5 N/mm² tensile strength with 120%+ elongation, bridges cracks up to 3.5mm and shows zero water penetration at a 50-metre water column, with a bond strength of 2.0 N/mm² to prepared concrete and a stated durability of 10+ years.
View DetailsSingle-component, 100% pure acrylic elastomeric waterproof exterior coating for external walls, terraces, sloped roofs, MS/ACC sheets. White and heat-reflective, self-curing, with excellent elongation and recovery to bridge existing and future cracks. Remains unaffected by salt water, soap water, mild acids and alkalies, and acts as an effective heat transfer barrier.
View Details