New: Kerala distributor meet recap
ReadTile Adhesives, Grouts & Cleaners
Unsanded polymer modified cementitious grout for narrow tile joints, colour-fast and stain resistant, covering 4–4.5 Sq.Mtrs per kg on 150 mm x 150 mm tiles.
High performance UNSANDED POLYMER modified cementitious Tile Grout. Designed for interior and exterior use. Color-fast, highly water resistant, weather resistant and stain resistant. Non-shrinking, smooth and glossy finish. Coverage: 4–4.5 Sq.Mtrs per Kg for 150mm x 150mm tile size.
Figures are controlled laboratory results. Actual site performance varies with substrate, temperature, humidity, application method and workmanship — please confirm the current product datasheet before specification.
TILEX TG U 1600 is an unsanded tile grout, polymer modified and cementitious, for interior and exterior use. You mix it with clean water to a smooth paste and force it into the joints with a rubber float. As a tile joint filler it gives a smooth, glossy finish that is non-shrinking and colour-fast.
Fills narrow joints with a smooth and glossy finish.
Colour-fast and stain resistant in stone joints.
The unsanded mix is suitable for narrow mosaic joints.
Highly water resistant grout for pool tile joints.
Water and stain resistance suit bathroom and kitchen joints.
Weather resistant, so it is used on external floors too.
If you are working out how to fill tile gaps, coverage is 4–4.5 Sq.Mtrs per kg for 150 mm x 150 mm tiles. This polymer tile grout is highly water resistant, weather resistant, stain resistant and non-shrinking. Wait a minimum of 24 hours after fixing so the adhesive is fully cured, then force the grout in with a rubber float held at 45 degrees. Clean the tiles with a damp sponge and let the grout cure for 24 hours before use.
Armstrong Chemicals supplies TILEX TG U 1600 to sites across Telangana, Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, including Hyderabad, Vijayawada, Bengaluru, Kochi and Chennai.
With no sand in it, the grout is suitable for narrow joints and finishes smooth and glossy.
The polymer modified cementitious grout is highly water resistant and weather resistant, for use indoors and outdoors.
The joint holds its volume as it hardens and keeps its colour, with stain resistance as well.
Ensure tile adhesive is fully cured before grouting — minimum 24 hours
Remove all spacers and clean joints of dust and adhesive residue
Mix TILEX TG U 1600 with clean water to a smooth paste consistency
Force grout into joints using a rubber float at 45 degrees
Ensure joints are completely filled with no voids or air pockets
Remove excess grout from tile surface before it hardens
Clean tiles with damp sponge and allow grout to cure for 24 hours before use
Coverage estimation is not applicable for this product. Please contact our team for application guidance.
Full specifications, application systems, layering guides, and coverage tables.
Request a quote and your nearest Armstrong distributor will contact you directly.
TILEX 350 Tile Adhesive is a thin-set polymer modified cementitious tile and stone adhesive compliant with IS 15477-2004 minimum Type 1. Single component — just add water. Non-shrink, self-curing, with excellent adhesion to cementitious surfaces including plaster, concrete, screed, cement mortar beds and existing tiles. High compressive strength (>10 N/mm²) and shear strength (>0.8 N/mm²). Suitable for ceramic, vitrified, glazed, mosaic, stone, granite and marble tiles on internal and external, vertical and horizontal surfaces.
View DetailsTILEX 351 PLUS is a high-performance polymer-modified, thin-set tile adhesive for floors and walls — single component, just add water. Engineered for large-format tiles, vitrified tiles, and tile-on-tile applications, with anti-slip performance on vertical surfaces and proven bond strength to ANSI A118.4, EN 12004 C2 TE, and IS 15477:2019. For demanding external wall installations, gauge with URPAdmix 73 in place of water for added elasticity and tensile strength.
View DetailsTwo component highly flexible adhesive for tile-on-tile applications. Complies with ANSI A 118.4, EN 12004 D2TES2.
View Details