New: Kerala distributor meet recap
ReadGrouts, Anchors & Micro Concrete
High strength, non-shrink cementitious micro concrete that can be poured or pumped in restricted areas, with compressive strength above 50 MPa at 28 days.
High Strength Non-Shrink Cementitious Micro Concrete. Can be poured or pumped in restricted areas.
Figures are controlled laboratory results. Actual site performance varies with substrate, temperature, humidity, application method and workmanship — please confirm the current product datasheet before specification.
ROOFCRETE MC 240 is a micro concrete with a cementitious base, high strength and non-shrink behaviour. You mix it with water to a flowable consistency, then pour or pump it into formwork. Because it is free-flow, it works as a pumpable repair concrete in restricted areas.
Poured or pumped into formwork around the column.
Free-flow mix fills formwork without vibration in small sections.
Poured or pumped where access is tight.
High strength, non-shrink mix for foundation work.
Cementitious repair concrete with aggregate up to 6 mm.
As a column jacketing material, it gives compressive strength above 50 MPa at 28 days and uses a maximum aggregate size of 6 mm. It is non-shrink, so this structural rehabilitation material holds its volume as it hardens. No vibration is required for small sections. Moist cure for 7 days.
Armstrong Chemicals supplies ROOFCRETE MC 240 to sites across Telangana, Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, including Hyderabad, Vijayawada, Bengaluru, Kochi and Chennai.
It is non-shrink, so the repair holds its volume as it hardens inside the formwork.
The free-flow, pumpable mix can be poured or pumped in restricted areas, with no vibration required for small sections.
Compressive strength above 50 MPa at 28 days gives a structural repair for jacketing and strengthening work.
Mix with water to flowable consistency
Pour or pump into formwork
No vibration required for small sections
Moist cure for 7 days
Coverage estimation is not applicable for this product. Please contact our team for application guidance.
Full specifications, application systems, layering guides, and coverage tables.
Request a quote and your nearest Armstrong distributor will contact you directly.
RAPIDSTRONG GROUT EP 403 is a two-component, low-viscosity, free-flow epoxy resin grout compliant with ASTM-C-881-78, designed for filling gaps between industrial machinery base plates and concrete or steel substrates under mobile, reciprocating and dynamic loads. Non-shrink with high compressive, tensile and flexural strength — achieving up to 91 N/mm² at 7 days. Three formulations for fine gaps (0.1–10mm), medium gaps (10–70mm) and large gaps (>70mm), with filler materials supplied by Armstrong. Resistant to oil, grease, fats, mild acids, alkalies, fresh water and seawater. Used in steel works, refineries, electroplating plants, chemical plants, turbine installations and crane rail foundations.
View DetailsTwo Component Structural Grade High build Under Water Epoxy mortar/concrete for heavy load situations.
View DetailsROOFCRETE EP is a three-part, solvent-free structural epoxy concrete and mortar system — epoxy resin, amine hardener and silica filler, mixed with site-graded aggregates to form a high-strength epoxy repair concrete. Designed for reinstatement of distressed and defective concrete in deep section repairs: foundations, dams, spillways, bridges, runways and highways. Achieves 93 N/mm² compressive strength at 7 days, bonds to cement at 4 N/mm², and cures unaffected by humidity — suitable for both damp and dry surfaces.
View Details