New: Kerala distributor meet recap
Read
TILEX EPOXY STAIN FREE 100
- Tile joints turning black
- Swimming pool tile grouting
- Kitchen tile joint stains
- Chemical resistant tile joints
TILEX Epoxy Stain Free 100 is an easy-to-use, stain-free, colour-fast, chemical and temperature-resistant, highly durable 100% epoxy tile grout for ceramic tiles, vitrified tiles, marble and stone. A three-part system (Part A + Part B + Part C filler powder) that is self-compacting and self-levelling — for floor and wall tiling in kitchens, cafeterias, restrooms, wash areas, swimming pools, and all interior and exterior applications where chemical resistance and permanent stain protection are required.
Specifications
Figures are controlled laboratory results. Actual site performance varies with substrate, temperature, humidity, application method and workmanship — please confirm the current product datasheet before specification.
Where to use TILEX EPOXY STAIN FREE 100: epoxy tile grout for kitchens and pools
TILEX EPOXY STAIN FREE 100 is an epoxy tile grout made as a three-part system of two liquids and a filler powder. All three parts are mixed together and worked into the joints by trowel or caulking gun. It is a stain free tile grout for ceramic, vitrified, marble and stone tiles on floors and walls.
Kitchens
Stain-free joints with chemical resistance for kitchen floors and walls.
Cafeterias
Used on cafeteria floor and wall tiling where stains are a concern.
Restrooms & Wash Areas
Gives permanent stain protection in restrooms and wash areas.
Swimming Pools
Cover and protect from sunlight for 7 days after application.
Interior Floors & Walls
Self-compacting, so no vibration or compaction is required.
Exterior Floors & Walls
In open areas, protect the grout from sunlight for 7 days.
Ceramic Tiles
Do not clean the tiles with acid cleaners before grouting.
Vitrified Tiles
Remove excess with a grout float and leave no grout on tile faces.
Marble & Stone
Colour-fast, stain-free grout for marble and stone joints.
Where tile joints turning black is the complaint, this 100% epoxy grout is stain-free, colour-fast and resistant to chemicals and temperature, which is why it is used as an epoxy grout for swimming pool work. Apply when the surface is between 16°C and 32°C. Packs are 1, 5, 10, 20 and 25 kg. Mix all of Part A and Part B, then add Part C and nothing else. Start cleaning 30–40 minutes after application with clean water and a scrubber.
Armstrong Chemicals supplies TILEX EPOXY STAIN FREE 100 to sites across Telangana, Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, including Hyderabad, Vijayawada, Bengaluru, Kochi and Chennai.
The Last Grout You'll Ever Need to Replace
A three-part 100% epoxy tile grout — colour-fast, stain-free and chemical-resistant — for ceramic, vitrified, marble and stone in kitchens, restrooms, swimming pools and all commercial installations where ordinary cement grout fails.
Get a QuoteWhy Cement Grout Fails in Demanding Areas
Cement-based grouts absorb stains, discolour over time and lack the chemical resistance needed for commercial kitchens, wet areas and swimming pools — requiring periodic removal and re-grouting.
The TILEX Epoxy Stain Free 100 Advantage
A 100% epoxy system that is stain-free, colour-fast and chemically resistant from day one — self-compacting, easy to clean, and built to last the life of the tiling installation.
Stain-Free, Colour-Fast for Life
100% epoxy chemistry means TILEX Epoxy Stain Free 100 does not absorb stains or discolour — no periodic re-sealing, no discoloration from food, chemicals or water.
Rated for Swimming Pools & Commercial Kitchens
Chemical and temperature-resistant epoxy grout built for areas that ordinary cement grout can't handle — swimming pools, food preparation areas, cafeterias and chemical-exposure environments.
Built for the Conditions That Destroy Ordinary Grout
Waterproof · Lay · Grout
Waterproof the Slab
Apply two coats of a compatible Armstrong waterproofing product on the mother slab/wall before tiling — for example Roofcoat Flexi 100 or Rainseal BMW 250.
Lay Tiles with TILEX Adhesive
Fix tiles with TILEX, TILEX HI-GRIP or TILEX SUPER tile adhesive, maintaining specified joint gaps and substrate flatness.
Grout with TILEX Epoxy Stain Free 100
Fill all joints with the three-part epoxy grout system for permanent stain-free, chemical-resistant protection.
Built for Where Cement Grout Fails
Permanent stain-free protection for commercial and demanding residential installations.
Stain-Free & Colour-Fast
100% epoxy surface absorbs nothing — no stains, no discolouration, no re-sealing ever needed.
Swimming Pool & Wet Area Rated
Chemical and temperature-resistant epoxy grout built for pools, kitchens, cafeterias and continuous wet-area exposure.
Resists Physical Abuse & Chemicals
Built for commercial installations that must resist physical shock, chemical attack and daily cleaning agents that destroy cement grout.
Self-Compacting, Easy Clean System
Self-compacting and self-levelling mix — no vibration or compaction. Begin cleanup 30–40 minutes after application.
Coverage by Tile Size × Joint Width
Approximate sq.ft coverage per 1/5 kg unit. Add 10% for waste and spillage.
| Tile Size | 2mm | 3mm | 4mm | 6mm | 8mm | 10mm | 12mm |
|---|---|---|---|---|---|---|---|
| 100×100×3mm | 52 | 38 | 26 | 18 | 13 | 11 | 9 |
| 150×150×4mm | 58 | 39 | 29 | 20 | 15 | 12 | 10 |
| 200×100×5mm | 52 | 35 | 27 | 18 | 13 | 11 | 9 |
| 150×300×6mm | 62 | 41 | 31 | 20 | 16 | 13 | 11 |
| 300×300×6mm | 78 | 52 | 39 | 26 | 20 | 16 | 13 |
| 450×300×7mm | 81 | 54 | 40 | 27 | 20 | 16 | 13 |
| 600×450×8mm | 101 | 67 | 50 | 34 | 25 | 20 | 17 |
| 600×600×8mm | 118 | 78 | 50 | 39 | 29 | 23 | 19 |
| 600×900×11mm | 103 | 68 | 51 | 34 | 25 | 20 | 17 |
| 900×900×12mm | 118 | 78 | 59 | 39 | 29 | 23 | 19 |
How to Use
Lay tiles with TILEX, TILEX HI-GRIP or TILEX SUPER tile adhesive, maintaining specified joint gaps
Clean tile joints thoroughly — remove all foreign matter from joint gaps before grouting
Check substrate temperature is between 16°C and 32°C (60°F to 90°F)
Do not clean tiles with acid cleaners before grouting
Empty entire Part A and Part B contents into a clean mixing pail; mix until fully blended
Add Part C filler powder — mix to uniform, stiff consistency; do not add any other ingredient
Pour mixed epoxy grout onto working area using a plastic sheet as a drop cloth
Work grout into tile joints using standard epoxy grouting techniques — manual trowel or caulking gun
Ensure all joints are fully packed; remove excess with a grout float before initial cleaning
Do not leave grout or stains on tile faces
For swimming pools and open areas: cover and protect from sunlight for 7 days after application
Initial clean (30–40 min after application): scrub surface with clean water and a scrubber
Residue removal: drag a clean thick towel across tiles to remove remaining residue
Finish cleaning within the 30–40 minute cleanup window and remove all residue from tile faces
Applicable Areas
Packing
Available in 1, 5, 10, 20 & 25 Kg packs. Contact Armstrong technical services or your authorised distributor for shelf life and pot life information — neither is specified in the TDS.
Safety & Cautions
Can be irritating to eyes and skin — avoid prolonged contact. In case of eye contact, wash immediately with water and seek medical attention. Do not swallow. Keep out of reach of children. Do not use acid cleaners on tile surfaces.
3-Part System Integrity
All three parts (A + B + C) must be fully mixed. No additional ingredients are permitted. The system is self-compacting and self-levelling — no vibration or compaction is needed after placement. For swimming pools and open areas, cover and protect the working surface from sunlight for 7 days after application.
Product Brochure
Download Technical Datasheet
Full specifications, application systems, layering guides, and coverage tables.
Frequently Asked Questions
Ready to protect your structure?
Request a quote and your nearest Armstrong distributor will contact you directly.
You may also need
TILEX 350 Tile Adhesive is a thin-set polymer modified cementitious tile and stone adhesive compliant with IS 15477-2004 minimum Type 1. Single component — just add water. Non-shrink, self-curing, with excellent adhesion to cementitious surfaces including plaster, concrete, screed, cement mortar beds and existing tiles. High compressive strength (>10 N/mm²) and shear strength (>0.8 N/mm²). Suitable for ceramic, vitrified, glazed, mosaic, stone, granite and marble tiles on internal and external, vertical and horizontal surfaces.
View DetailsTILEX 351 PLUS is a high-performance polymer-modified, thin-set tile adhesive for floors and walls — single component, just add water. Engineered for large-format tiles, vitrified tiles, and tile-on-tile applications, with anti-slip performance on vertical surfaces and proven bond strength to ANSI A118.4, EN 12004 C2 TE, and IS 15477:2019. For demanding external wall installations, gauge with URPAdmix 73 in place of water for added elasticity and tensile strength.
View DetailsTwo component highly flexible adhesive for tile-on-tile applications. Complies with ANSI A 118.4, EN 12004 D2TES2.
View Details