Injection Grouts and Crystalline Waterproofing

RAPIDSTRONG GROUT PU is an expansive, water-reactive, water-barrier polyurethane injection grout for free-flow pressure grouting. When it contacts water — including seawater and water containing slight acids or alkalies — it reacts quickly, expands into surrounding pores, cracks and narrow gaps, and polymerises within 36–48 seconds into a tough, highly adhesive solid. Non-toxic, non-pollutant, with no effect on potable water or marine life. Suitable for soil and abutment stabilisation, underground basements, retaining walls, rock areas, earth filling segments and structures exposed to waste water, industrial, chemical and sewage environments.

RAPIDSTRONG GROUT VM 99 is a high-performance, solvent-free, two-component polyurethane-based duromer injection resin for the structural sealing and strengthening of cracks, joints and cavities in both dry and water-bearing concrete structures. Mixed A+B at 1:1, it gels in 25–30 seconds and achieves >75 MPa compressive strength and 70 MPa flexural tensile strength — tested to DIN EN 196 T1. Capable of curing down to -20°C, with 1–12× volume expansion on water contact depending on ingress, and re-injectable through existing hoses for permanent capillary sealing. Suitable for pressure injection and gravity feed. Industrial use only.

Two components high strength Crystalline Blended Elastomeric water Barrier Grout. Complies with BS 1881.

ROOFEX is a high-performance penetrative crystalline waterproofing system. When applied to concrete, its active ingredients penetrate deep into the substrate and react with cement compounds and moisture — forming multiplied crystals that seal capillaries, pores and hairline cracks from within, transforming porous concrete into an impermeable mass. Effective against both positive and negative hydrostatic pressure. Four application methods: slurry coat, dry shake on fresh concrete, dry pack for joints and fillet sealing at construction joints. For water retaining structures, basements, effluent treatment and sewage plants.

RAPIDSTRONG GROUT PFC 79 is a single-component, water-reactive polyurethane polymer injection resin grout. When it contacts water, it initiates a rapid polymerisation reaction — expanding into surrounding pores, cracks and narrow gaps within 36–48 seconds to form a tough, highly flexible solid that stops active water ingress. Non-toxic and non-flammable, it is designed for free-flow pressure injection to seal active leaks, strengthen ground, and protect MS columns and structures against corrosion in basements, retaining walls, underground structures and rock areas.

High Performance Two Component water reactive Injection Resin for sealing and strengthening of dry and water bearing concrete structures. Multi-part composition provides deep penetration, tenacious crack bonding, and corrosion resistance in both dry and wet surface conditions.

Liquid applied High Performance Crystalline waterproofing system. Advanced liquid crystalline technology that penetrates deep into concrete and diffuses over time, reacting with cement material to fill airline cracks inside concrete with multiplied crystals. Makes porous concrete into a sound watertight substrate.

ROOFEX 2K 711 is a high-performance two-component crystalline waterproof coating mixed at 1:2:0.2 (Liquid:Powder:Water). Its active ingredients penetrate concrete and react with cement and moisture to form multiplied crystals that seal capillaries, pores and cracks from within. Tested to multiple ASTM standards: 10–12 bar hydrostatic resistance, 51 MPa compressive strength, 1.65 MPa adhesion and 16% elongation. Flexible, self-healing, self-curing. Suitable for positive and negative waterproofing on concrete, brick and stone masonry. For reservoirs, swimming pools, water tanks, basements, tunnels and sewage treatment plants.

ROOFEX COP is a cement-based waterproof coating with crystallization and osmotic properties, conforming to ASTM C 1202 and DINV 18998. Applied by brush or spray, it penetrates into concrete and activates both crystalline crystal formation and osmotic action — sealing cracks up to 0.4mm, blocking capillaries and pores, and remaining 100% waterproof even in permanent immersion at high pressures. Resists salt water and atmospheric pollution. For negative and positive waterproofing of water retaining structures, basements, effluent treatment and sewage plants.